Construction sites are dynamic and ever-changing. When the project speeds up, you can find workers from different trades working within close proximity of each other or commonly known as stacking.
To minimize the risk of accidents, it is important to do a complete site hazard analysis before workers are dispatched on the project.
Ongoing assessments should be completed to determine what special tools, equipment, and personal protective equipment will be needed to accomplish the work.
With a clear understanding of specific operations that are taking place around the jobsite, you can learn to recognize how some types of work will affect others. Arrangements and adjustments can be made to allow the safe completion of all tasks.
Regulatory regulations (OSHA, DOSH) require: Employees receive training and education to recognize and avoid unsafe conditions at their jobsite. They also learn applicable regulations that control or eliminate these hazards.
When doing a jobsite evaluation, look for potential problems in the following areas:
Fall protection for all open sides and edges.
Proper guardrails (different types for different scaffolds)
Safe access scaffolds with integrated ladders or hook-on ladders must be used
Check for proper platforms, planking, and walkways
All working scaffolds must be fully planked strong enough to have equipment, material and workers with a safety factor of 4 times the maximum intended load
A competent person to check the scaffolding making sure it is ok for workers to be on
Temporary Power – must be correctly installed GFCIs must be installed on properly rated circuits and temporary wiring must meet standard requirements for construction usage, no flat or household cords.
Potable water supply should be clearly marked and isolated to avoid possible contamination.
Fire prevention, protection, and control measures should be clearly marked, plainly visible, and proper maintenance and inspections logged on tags. Fire extinguishers must be correctly sized and rated in proportion to the project. Is there an existing emergency action response plan in place, or any sirens or signals you should know about? Are fire lanes clear?
Designated disposal areas/container areas should be conveniently located in a safe area and cleaned/dumped regularly.
General housekeeping appearance of the site and are sanitary accommodations provided?
The written hazard communication program must be in place with easy general access to the SDS (Safety Data Sheet) information.
The job shack office is the primary information hub of the project:
What is the general appearance around this building?
Are emergency phone numbers posted?
Is there a first aid station and supplies?
Is there an emergency response plan in place in the event of serious injury or incident?
Is compliance required by all workmen on site and enforced? What is the disciplinary policy of your company?
Who is the designated safety liaison for the various contractor workmen on this project?
These issues and concerns should be addressed and resolved with your company’s site personnel before work starts on any project.
A site specific safety orientation should be done with all workers at the beginning of each job. Remember that a good, ongoing hazard assessment, along with employee training, is the key to getting the project done safely.